吸盘/聚氨酯
VG.LBR20X45 聚氨酯矩形波纹管吸盘
• 适用于处理流动包内的快餐食品和食品棒
• 带 2.5 波纹管的版本
• 是拾取物品并将其放在旁边的理想选择
• 薄唇口能够完全适应塑料薄膜
• 适用于重大水平的补偿,表面不规则的零食
技术数据
材料 PU50
在不同真空度下与表面垂直的提升力 [N]-20 kPa(14.8) -60 kPa(27.5) -90 kPa(37.4)
在不同真空度下与表面平行的提升力 [N]-20 kPa(21.2) -60 kPa(33.4) -90 kPa(57.6)
体积 8.9 [cm³]
zui小曲线半径15mm
zui大垂直移动距离12mm
吸盘质量9.3g
双钳口非自动校准中心斜口气动夹具 PB系列
• FDA-H1 食品级润滑脂。
• 提供 6 毫米、8 毫米和 12 毫米孔径三种尺寸。
• 位于颚式钳尖部或尾部的传感器。
• 带齿(用于浇口抓持)或者带衬垫(用于软接触)的颚式
钳。
• 铝质或钢质颚式钳
2-jaw n0n-selfcentering angular pneumatic sprue
gripper series PB
• FDA-H1 food-grade grease.
• Three available sizes with piston bore 6mm, 8mm, 12mm.
• Sensor on the tip of the jaw, or on the tail.
• Jaws with teeth (for sprue gripping), or with pads (for soft
contact).
• Jaws in aluminium or steel.
带端子板的传感器盒
IP66聚苯i乙烯传感器盒。• 可定制的电缆进线和出线,配有标准电缆密封套。• 2个螺钉端子,可直接连接15个输入/输出 。• 随附铝挤压型材直接固定螺钉。• 每个连接线路的zui大开关电流达1A。
IP66 polystyrene sensor box.• Customizable cable input and output with standard cable gland
2 screw terminals with direct connection of 15 inputs/outputs. • Supplied complete with direct fxing screws for aluminum extruded profles.
Maximum switching current up to 1A for each connection line.
以上信息由专业从事电动旋转装置的吉玛泰克于2024/5/1 9:11:20发布
转载请注明来源:http://xuchang.mf1288.com/jmtkzdh-2744938743.html